Home > Extrusion Production Line >

High Productivity Co-extrusion PVC Panel Machine for Co-extrusion Processing Type

Product Categories

Extrusion Mould And Parts [188]
UPVC Profiles Cable Duct Mould [86]
WPC and UPVC Hollow Wall Panel Mould [13]
WPC/PVC Foam Board Mould [2]
WPVC and WPE Mould [1]
PP Architecture Mould [1]
Auxilliary Equipment [1]
Mould For UPVC Profile [68]
Mould For PE Profile [25]
Mould For WPC Profile [6]
Mould For Panel Profile [11]
Extrusion Production Line [35]

Shanghai Yuhao Plastic Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

High Productivity Co-extrusion PVC Panel Machine for Co-extrusion Processing Type

Ask Lasest Price
Brand Name :	EKO
Supply Ability :	150 Set/Sets per Year
Price :	$35,000.00/sets 1-2 sets

Add to Cart

Product Details
Company Profile

High Productivity Co-extrusion PVC Panel Machine for Co-extrusion Processing Type

Products Description

65/132- PE Wood plastic co-extrusion machine line

High Productivity Co-extrusion PVC Panel Machine for Co-extrusion Processing Type

List of the line
1	Vacuum Feeder device	1set
2	SJZ65/132 conical twin screw extruder	1set
3	YFD240 Vacumm calibration table	1set
4	YFG240 Cutter	1set
5	YFF240 Stacker	1set

Technical specification

Basic information
Mold provided by customer
Capacity: 120-200kg/h
Calcium : Customer decide
The output capacity varies with the materials and the operation conditions.
Line speed: 0.5～4.6m/min
(The line speed varies with the thickness and operation condition)
The height of the centerline of the extruder: 1050mm
Operation direction: From right to Left

Installation condition

Power
Standard: 415V, 3-phase, 50HZ
Control voltage: 415V
Protection method: Earth connection
Compressed air
Pressure: 0.4~0.6Mpa
Cold water
Pressure: 0.2~0.4Mpa
Temperature: 10 ~ 15℃

Vacuum feeder device

Motor: 2.2KW х 1
Silo : Stainless steel

Screw & Barrel.

Screw diameter: Ф65/132mm
PE material special designed for screw with rotation speed of 1 ~ 34.7 r/min
Screw material: 38CrMoAlA, nitrogen treatment, with the thickness: 0.5~0.7mm, hardness: HV740~940.
Barrel material: 38CrMoAlA, nitrogen treatment, with the thickness: 0.6~0.7mm, hardness ≥HV940~1100.
Heating unit: cast aluminium heater + stainless steel covering + cooling fan
Heating zone quantity: 4 with total power 21kw Temperature range: 50~300℃
Cooling fan power: 3 х 0.55KW
Screw&Barrel bi-metal treatment
Vacuum exhaust system
Vacuum pump: 1 set
Vacuum pump power: 3 phase asynchronous motor 4 KW
Vacuum degree: 0 - 0.075 MPa

Dosing feeding System

With stainless steal hopper and forced mixing unit
Feeding motor power: 1.5KW, 3 phase asynchronous motor
Controlled by Imported brand AC frequency converter
Transmission system
High torque output
Thrust bearing domestic
Water cooling device
Gear material: 20CrMoTi
Combination of hard-toothed surface, nitriding gear grinding processing
Adopting Germany technology, with a long service life, low noise and low heating
Motor directly connected to gearbox through coupling
Vertical design, compact structure

Main motor systemMain motor system

Motor: WEG motor or SIEMENS BEIDE AC motor, 37KW
Main motor adjustment: by AC with imported ABB brand
Outer size: 4200 × 1500 × 2100mm
Center height: 1050mm
Weight of extruder : 4000kg
Electric control system
Controlled by B&R PLC model computer controlling cabinet. All the parameters can be defined on the operation table, such as the rotation speed, temperature. Also it has the following alarm functions:
1. Overload of the motor.
2. After the motor has been started, if the maximum torque is more than 105% of that is permitted and if this condition lasts more than 3 minutes, the alarm will start and then stop the machine.

PLC: B&R

Circuit breaker: ABB/SCHNEIDER
Relay: IDEC/SCHNEIDER/OMRON
Contractor: SIEMENS/SCHNEIDER
Air switch: CHNT/SCHNEIDER
Prepare 5 heating zones for die
PID Temperature control
Emergency stop devices and alarm systems
Alarm system detection range
Over current protection alarm function
Screw loose off parking automatic alarm functionMotor: WEG motor or SIEMENS BEIDE AC motor, 37KW

Vacuum calibration tableVacuum calibration table

Calibration tanks and basin are made of stainless steel
Table length: 4500mm
Table width : 1100mm
Distance between aluminum track: 320mm
Water pump and quantity:4KW x 1
Quantity of water nozzle: 20 pcs (marked in blue)
Mould supporter: casting aluminum bar with T shaped slot for fixing mould tool. Supporting rack and water pipe are integrated,
which is made of stainless steel tube.
Electric controlling cabinet and panel with waterproof covering
With air fan device (0.75kw) for drying wa（including connect flange）ter on the product surface
Lifting device for calibration: calibration and haul-off are connected by lead screw bolt with deceleration motor of 0.75kw.
Fitted with a device for vertical adjustment: Motor drive.
Controlled by two screw motor, four mini screw reducer drive
Fitted with a device for horizontal adjustment and can be adjusted by hand

Cutter

Cutting motor power: 2.2KW
Max. Cutting width: 240mm
Max. Cutter lifting height: 80 mm
Power of sucking-dust-fan:2.2 KW
Cutting saw: Alloy steel, specially for cutting PVC profile – O.D. 450mm
Rack moved by reduction motor and knife lifting and clamping moved by pneumatic
Manual or automatic cutting type
With proximity switch meter-calculating device
Foreign famous brand electrical

StackerStacker

Length of stacker: 6m

With proximity switch meter-calculating device

Form of stacker: Disassembled

Stacker products contact parts are covered by the rubber block

Spare parts

SJZ65/132 Concial twin screw extruder			Qty.
1	Mercury temperature meter 0-300℃	4 pcs
2	High-temperature cable	20m
3	screw-axial adjusted washer	1 set
4	Thermo-couple	5 pcs
5	Heater of Joint core	1 pc
6	Potentiometer	1 pc
7	Oil seal of high-speed shaft	1 pc

YF240 extrusion accessory			Qty.
1	￠8 T-type adapter	3 pcs
2	Ball valve model A,B	5pcs/each
3	￠8 Gas pipe	30m
4	Limit switch	2 pcs
5	Quick-change adapter	10 pcs
6	Solenoid valve	1 pc
Other parts			Qty
1	Cinqueofoil axial linker	1 pc
2	Speed meter for drawing unit	1 pc
3	Terminal adapter	2 pcs
4	2-position 5-port solenoid valve	2 pcs
5	One-way throttle valve	2 pcs

45/25 single screw extruder

output ：15 KG/H

including connect flange

Type	45×25
Screw
Diameter	45mm
L/D	25:1
Material	38CrMoAlA
Treatment	Nitrided
Barrel
Material	38CrMoAlA
Treatment	Nitrided
Heating control zones	Four
Heating power	2.3 KW×4
Cooling system	By blower fan
Cooling power	0.04KW×4
Gearbox
Material of the house	QT200
Gear type	Helical gears
Material of the gear	20CrMnTi
Heat treatment of the gear surface	Quenching
Bearings	Chinese famous bearing
Lubricating system	Splashing system
Feeding block
Method	Water circled cooling system
Material	Q235
Driving motor
Method	AC motor
Power	7.5 KW
Hopper
Material	Stainless steel
1.Temperature is controlled by popular meter




2.Electric part mainly adopts Schneider or CHIT
3. Extruder speed regulation controlled by ABB Inverter
4. Thermocouple adopts compensation lead avoid the loss of signal during transportation.
spare part
thermo-electric couple	2sets
heating ring	1 set

Finally Product

Company Profile

Development 1993--2018
1993---Set up
(One of the earliest extrusion mould pioneers in China) 2010---Produce wide board products
1996---Hongda Plastic Mould Co., Ltd (PVC profile mould). 2013---Set up joint-venture in outer Mongolia
2002---Research and develop PVC WPC & PE mould 2013---Sales exceed 50 million yuan
2003---Gain ISO9001(2000) & Sales exceed 5 million yuan 2014---Foreign trade sales exceed 50 million yuan
2004---Research PVC foam board 2016---Spread new product & technology of wall pane
2005---Sales exceed 10 million & New factory(15000m2) 2017---Set up (EKO)Shanghai Yuhao Plastics Co., Ltd
2007---Set up Shanghai eko Mould Co., Ltd 2017---Set up (EKO) Wuxi Jiuke Mould Co., Ltd
2008---Sales exceed 20 million yuan 2017---Sales exceed 80 million yuan
2009---Research foam board crust technology 2018---Unified use the brand-EKODevelopment

Huangshi Hongda Plastic Mould Co., Ltd

Huangshi Hongda Plastic Mould Co., Ltd

(EKO)Huangshi Hongda Plastic Mould Co., Ltd, located in Huangshi, the City of Mould, which is the leading enterprise in the mould
industry. And its annual output can achieve 1,500 sets of mould.

(EKO)Shanghai Yuhao Plastics Co., Ltd

EKO)Shanghai Yuhao Plastics Co., Ltd

A trading company based on Hongda and Eko mould company, which has a wide range, good quality, reasonable prices and stylish
designs. Our products are extensively used in many different fields and industries.
melt blown non woven fabric melt blown
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs

Customer Photos

OUR CUSTOMERS

melt blown non woven fabric melt blown
In China, our products can be found in all the cities.

In the world, our products are exported to over 40 countries and districts.
We are proud to have friends all over the world.

Our Service

As a professional extrusion mould manufact ure with twenty years of expreience accumulation. we can undertakes the whole
international extrusion projects and provides one-stop service and technology.We provide customers with raw material formula,
extrusion mould, die technology, spot operation and other all-round technology and services Our experienced technicians will give you the best service. We promise: In China, 360 days guarantee period, sending perfect
service to your factory within 48 hours.

Package Material

FAQ

1. who are we?
We are based in Shanghai, China, start from 2017,sell to Southeast Asia(30.00%),South Asia(20.00%),Mid East(10.00%),Africa(10.00%),South America(5.00%),Eastern Asia(5.00%),North America(5.00%),Northern Europe(5.00%),Eastern Europe(5.00%),Domestic Market(1.00%),Western Europe(1.00%),Southern Europe(1.00%),Oceania(1.00%),Central America(1.00%). There are total about 201-300 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Extrusion products,Chemical material and additives,Extrusion mould and parts,Extrusion machinery and parts,Other equipment

4. why should you buy from us not from other suppliers?
More than 20 years experience in mould research, development and manufacturing; well equipped testing and technical force; strong after sales service team; reasonable price and tailor-made designs; vast applications in different fields and well recognized.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,Express Delivery；
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C;
Language Spoken:English

Contact with us

Shanghai Yuhao Plastic Co.,Ltd

Address: Huatai Center, JiangQiao Town, Jiangding area, Shanghai, China.melt blown non woven fabric melt blown

Contact person: Xavier Leng
Tel/wechat/whatsapp:

+86 18964066427
E-Mail: 801@hdeko.com

High Productivity Co-extrusion PVC Panel Machine for Co-extrusion Processing Type

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shanghai Yuhao Plastic Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Extrusion Production Line products from this supplier

Find Similar Products By Category:

Security & Protection